ASME SA572 Grade 60 [415] steel, also called ASTM A572 Grade 60, SA572 Grade 60/ SA572 Grade 415/ SA572Gr60, is a high-strength low-alloy columbium-vanadium structural steel. SA572 Grade 60 [415] alloy provides a minimum yield point of 415 MPa[60ksi] in thicknesses up to 15in. [380 mm]. For applications, such as welded bridge construction, where notch toughness is important, notch toughness requirements are to negotiated between the purchaser and the producer.
ASME SA572 Grade 60 [415] steel size
Shapes: steel plate, steel sheet, steel bar, angle steel, steel section
Thickness: 1.2-380mm
Width: 1220-4200mm
Length: 5000-18000mm
Notes: coil thickness ≤ 25mm
SA572 Grade 60 [415] steel chemical composition max. (%)
Grade | C | Mn | P | S | Si |
SA572 Grade 60 | 0.26 | 1.35 | 0.04 | 0.05 | 0.40 |
SA572 Grade 60 [415] steel mechanical properties
Grade | Yield Strength Mpa |
Tensile Strength Mpa |
Elongation % in 200mm |
Elongation % in 50mm |
SA572 Grade 60 | 415 | 520 | 16 | 18 |
Tensile requirements (including yield point, tensile strength, and minimum elongation) and alloy content are also specified. General delivery and test report requirements are also cited.
SA572 Grade 60 [415] pate test certificates
We at GIC provide MTC (Mill Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
As a professional low alloy steel plate and sheet supplier in China, we can supply hot rolled ASME SA572 Grade 60 [415] plates, SA572 Grade 60 [415] low alloy steel sheets and SA572 Grade 60 plate price. For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional tests, of Specification A6/A6M apply.
Leave a Comment