The company attaches great importance to systematic management, and has passed the a572 grade 50 astm carbon steel grade yield ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system, and ISO 9001: 2008 certification. Insist on a572 grade 50 astm carbon steel grade yield quality and promote brand development. The company's physical and chemical testing equipment is fully equipped and the quality management operation is standardized. Since 2002, the national, provincial, and municipal product quality inspection random inspection pass rates are all 100%.
The elongation of low alloy high strength steel is 15% - 23%, and the impact absorption energy is more than 34J at room temperature. The a572 grade 50 astm carbon steel grade yield, low alloy high strength steel has good plasticity and impact resistance, which can avoid brittle fracture during impact, and make cold bending and welding easy. In addition, the brittle transition temperature of low alloy high strength steel is low, and the absorbed work value of Grade E steel is not less than 27J at - 40℃. This is of great significance to the engineering components and transportation tools such as vehicles, ships, offshore oil platforms, containers, bridges and so on.
10# seamless steel pipe chemical composition : C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. 10# seamless steel pipe mechanical properties: recommended heat treatment temperature: 930℃, tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%, impact energy is not required. a572 grade 50 astm carbon steel grade yield, 10# seamless steel pipe has high plasticity and toughness, no temper brittleness tendency, and good weldability. Its machinability under cold drawing or normalizing treatment is obviously improved. In cold state, 10# seamless steel pipe is easy to be extruded and molded, but its strength is low, and its hardenability is very poor.
We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.