The S35C/1035 carbon tool steel thick plate is made of carbon tool steel and is made by hot rolling.
This carbon tool steel has good cold and hot processing performance, high hardness and plastic resistance, low production cost and wide range of uses. S35C/1035 hot rolled plate, Carbon tool steel is usually delivered in an annealed or high temperature tempered state. It is mainly used to manufacture cutting tools, measuring tools and molds with low cutting speed, simple shape and low precision. The thickness of the steel plate is 4.5-25mm, and the width and length comply with GB709 regulations.
Hydrogen (H) is the most harmful element in general steel such as S35C/1035 hot rolled plate. Hydrogen dissolved in steel will cause hydrogen embrittlement, white spots and other defects. Hydrogen, like oxygen and nitrogen, has very little solubility in solid steel. It dissolves into liquid steel at high temperature, and accumulates in the structure without time to escape when cooling, forming high-pressure micro pores, which greatly reduce the plasticity, toughness and fatigue strength of steel, and even cause cracks and brittle fracture in severe cases. "Hydrogen embrittlement" mainly occurs in martensitic steel, but not very prominent in ferrite steel, and generally increases with hardness and carbon content.
The company has strict control on the quality of S35C/1035 hot rolled plate. Each S35C/1035 hot rolled plate is inspected for the whole process, including raw material purchase, production process according to the procedures and relevant regulations. According to the technical standards and technical requirements, the composite quality inspection is carried out to confirm whether the S35C/1035 hot rolled plate meets the specified quality requirements.