American SA283 C mild steel for ships and marine engineering stock

Flat steel is divided into galvanized flat steel, carbon flat steel, stainless steel flat steel, etc. according to the material. Flat steel can be divided into hot-rolled flat steel and forged flat steel according to the forging process. SA283 C mild steel for ships and marine engineering, Hot-rolled flat steel is a potential-rolled long steel with a rectangular cross-section for general use. Forged flat steel is a long steel plate with a rectangular cross section that is forged. Hot-rolled spring flat steel is mainly used to manufacture leaf springs for automobiles, tractors, railway transportation and other machinery. The thickness of the flat steel is 8-50mm, the width is 150-625mm, and the length is 5-15m.

A514gr.F high yield strength structural quality steel chemical composition%
C: 0.10-0.20, Si: 0.15-0.35, Mn: 0.60-1.00, P max.: 0.035, S max.: 0.035, Ni: 0.70-1.00, Cr: 0.40-0.65, Mo: 0.15-0.25, V: 0.03-0.08, Cu: 0.15-0.50, B: 0.001-0.005
The mechanical properties in the plate thickness (mm)T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.