Compared with 12CrMoV steel, astm a709 gr 50 low alloy steel, 12Cr1MoVR pressure vessel steel has higher oxidation resistance and heat strength. The creep limit of this steel is very close to the endurance strength value, and it has high plasticity under the condition of long-term stretching; the steel has good manufacturability and weldability, but it needs to be preheated to 300 ° C before welding, and the stress needs to be removed after welding deal with.
astm a709 gr 50 low alloy steel, Q345 and Q345B are steel numbers. The differences are as follows:1. Q345 is general and does not indicate the quality level; Q345B is clear and the quality level is B.2. Q345 does not require to inspect the impact performance; Q345B requires that the impact performance at room temperature is qualified (impact at 20 ℃).3. Q345 does not indicate carbon content of steel; Q345B carbon content is 0.20%.Q345 refers to carbon structural steel with yield point (σ s) of 345MPa. The following letters indicate the quality level, including A, B, C, D and E.
The company's after-sales service tenet is "customer first, timely guarantee, enthusiastic service and effective work". In order to establish a set of perfect after-sales service system and strict management system, so that the after-sales service can be effectively guaranteed. The company has set up after-sales service department to ensure timely, unique and effective response to every user's request, coordinate internal resources internally, and put an end to all evasion and delay.